New and Used Equipment

Call for more information

 

Core Drill

1/4

Wall Sawing Wire Sawing Core Drilling

CB30 EXL 480 Electric Hydraulic Power Pack

Manufacturer

Diamond Products

Motor

30 HP 480 PHIII Baldor Motor

Mileage/Hours

Condition

Good

Sale Price

$3,500.00

30 HP 480 PHIII Hydraulic Power Pack with hoses on 4-wheel castors. Equipped with 2 - 30’ - ¾” Hoses and ¾” Brunning dripless fittings.

1/4

Core Drilling

CB748 formerly the DW194 Core Drill Motor

Manufacturer

Diamond Products

Motor

110V 20 AMP/3.5HP

Mileage/Hours

Condition

Good

Sale Price

$750.00 each includes M1 Drill Stand and Carriage

Black and Decker/DEWALT 110V 20 AMP/3.5HP drill motor comes with two speeds with RPM's of 350/900. Has clutch and is recommended for 2" to 14" in diameter bits. WEIGHT 32LBS

1/4

Core Drilling

DM 340 Drill Motor and DS 450 Drill Stand

Manufacturer

Husqvarna

Motor

110V 20 AMP/3.5HP

Mileage/Hours

Condition

Very Good

Sale Price

$1,950.00 each with DS 450 Drill Stand

20 Amps, 110 Volts, 3 Speed Motor Max recommended bit diameter up to 16" (400mm). Weight: 31 lbs (14 kg)

1/4

Core Drilling

DM650 HF200-500V 1 PH-3PH Core Drill Motor & Stand

Manufacturer

Husqvarna

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$8,500.00 each with DS Drill Stand, Spacer and PP220 Power Pack

Includes Drill Motor, Drill Stand w Wheel Kit, Spacer Assembly and PP220 Power Pack (Serial #: 020171000012) 24” Max recommended bit diameter. 18 step adjustable rpm range.

1/4

Wall Sawing Wire Sawing Core Drilling

PP220 HF 200-500 V 1PH Power Pack

Manufacturer

Husqvarna

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$2,500.00

PP220 is a versatile electric power pack developed for our high frequency-powered PRIME™ product range. This water-cooled power pack is perfect for applications that have multiple cutting sites due to its low weight and compact design. Only one hose and one cable from converter to machine, simplifying setup and transport.

1/4

Wall Sawing Wire Sawing Core Drilling

PP490, 380-480V 50-60HZ Power Pack

Manufacturer

Husqvarna

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$21,500.00

With Husqvarna PP 490 electric power pack you can power your large wall sawing system Husqvarna WS 482 HF, including the wire saw Husqvarna CS 10, as well as your Husqvarna PRIME™ handheld power cutters and drill motor. This means more work done with less equipment.

1/4

Core Drilling

TS 403 Core Drill Motor (includes drill stand and carriage)

Manufacturer

Diteq Shibuya

Motor

110V 27 AMP

Mileage/Hours

Condition

Good

Sale Price

$950.00 each includes Drill Stand and Carriage

Shibuya110V 27 AMP drill motor comes with 3 speeds 300/800/1400 RPM. This unit comes with a clutch system and is recommended for 2" to 16" in diameter.

1/4

Core Drilling

TS 605 HAWG Core Drill Motor (includes drill stand and carriage)

Manufacturer

Diteq Shibuya

Motor

110V 27 AMP

Mileage/Hours

Condition

Good

Sale Price

$2,450.00 each includes Drill Stand, Spacer Block and Carriage

Shibuya 605 – 110V 27 AMP with 3 speed 150/300/600 RPM Drill Motor. The TS-605 has a 26" bit capacity (34" capacity with optional 4" spacer).
This unit features a a powerful 27 amp three speed (150/300/600) low noise Shibuya motor that is equipped with a slip clutch. The TS-605 has a 26" bit capacity (34" capacity with optional 4" spacer). This unit is equipped with a motor overload protection.

1/4

Core Drilling

WEKA DK22 Drill Motor includes M5 Stand and Carriage

Manufacturer

Diamond Products

Motor

23 Amp. 110 Volts Motor

Mileage/Hours

Condition

Good

Sale Price

$750.00 each includes M5 Stand and Carriage

23 Amp WEKA DK22 3 speed motor; Quick release motor mount; 2-1/2” x 3” extruded aluminum light weight column (mast) that is hard anodized to prevent wear. Can drill up to 20” Bits.

 

Demolition Tools & Trucks

1/7

Demolition Tools & Trucks

1999 Ford F550 Box Truck

Manufacturer

Ford

Motor

Diesel

Mileage/Hours

166530

Condition

Fair

Sale Price

$5,000.00

This truck has a chassis mounted PTO powered system delivers 70 kVA power and frees up all your cargo space to haul more gear to get your job done without having to tow generator. Plus a large lift gate to safely load and unload even your biggest saws. Includes hose reels and storage racks.

1/2

Demolition Tools & Trucks

2004 F450 with Water Tank

Manufacturer

Ford

Motor

Diesel

Mileage/Hours

134026

Condition

Good

Sale Price

$29,500.00 Truck Only; Saw and Trailer can be purchased separately

This truck is set up to either saw or spray. I comes with a 350 Gallon tank and is plumbed to the automatic hose reel and 2” pump. The 450 is a great workhorse and can 2 saws and a full water tank with ease.

1/4

Demolition Tools & Trucks

2012 F450 F4G4 4x2 Regular Cab with Cap

Manufacturer

Ford

Motor

V10 Gas

Mileage/Hours

86484

Condition

Very Good

Sale Price

$29,500.00

This is a great truck. The size is just right especially if you’re used to the confines of 1 ton pickup. And you’ll l;ove the extra weight and towing capacity. This truck comes equipped with all-aluminum locking cap. This truck is shown with an optional Husqvarna Diesel Saw and Trailer.

1/2

Demolition Tools & Trucks

2017 F550 XL w 16’ Box and Thieman TVL 30A Power Lift Gate

Manufacturer

Ford

Motor

6.7L Power Stroke V8 Diesel

Mileage/Hours

Condition

Very Good

Sale Price

$49,500.00

350 Gallon Water Tank with Hard Piping To 2” Pump, Blade Rack and Shelving Storage Unit

1/5

Demolition Tools & Trucks

2019 F550 XL w 14’ Box, TVLR 30AL Power Lift Gate and Real Power 480 PHIII 60 AMP PTO Generator

Manufacturer

Ford

Motor

6.7L Power Stroke V8 Diesel

Mileage/Hours

184

Condition

New

Sale Price

$115,000.00

This truck has a chassis mounted PTO powered system delivers 70 kVA power and frees up all your cargo space to haul more gear to get your job done without having to tow generator. Plus a large 30AL Lift Gate to safely load and unload even your biggest saws.

1/3

Demolition Tools & Trucks

CB35 BVXL Gasoline Hydraulic Power Pack

Manufacturer

Diamond Products

Motor

35 HP Briggs-Vanguard

Mileage/Hours

137

Condition

Very Good

Sale Price

$5,500.00

Diamond Products Core Bore CB35BVXL has a 35 HP Briggs-Vanguard gas engine with a maximum 17 GPM fully adjustable flow control. Includes 2 - 25’ x 5/8” Hoses.

1/1

Demolition Tools & Trucks

Cut-Vac Assembly with Dolly

Manufacturer

SawTec

Motor

Metabo 24-180

Mileage/Hours

Condition

Very Good

Sale Price

$500.00

The U.S. Saws Cut-Vac and dolly assembly is designed to cut decorative lines in concrete, clean out control joints, and cut key ways for coating termination points. This machine is used by industrial floor coating contractors as well as decorative concrete contractors. This machine has a very narrow blade guard which helps the operator keep a nice straight line. The dust guard covers most of the blade so dust collection is superior when attached to a 200+ cfm vacuum.

1/3

Demolition Tools & Trucks

HV2312 Hydrapak

Manufacturer

RGC

Motor

18 HP Briggs & Stratton Vanguard Gas

Mileage/Hours

469

Condition

Good

Sale Price

$3,500.00

Each Unit Is Equipped With Stainless Steel Protective Frame, Fold-Down Handle, 16" Pneumatic Tires, Hydraulic Reservoir, Low Oil Shutdown, Heavy-Duty Heat Exchanger And Lifting Eye.

1/1

Demolition Tools & Trucks

NA

Manufacturer

Harrington Hoists

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$1,500.00

Harrington 1 Ton 10' Electric Hoist

 

Flat Saw

1/4

Flat Sawing

CC1310 E3XL 10 HP 480 PHIII – 20” Slab Saw

Manufacturer

Diamond Products

Motor

10 HP-3PH 480V Baldor Electric Motor

Mileage/Hours

Condition

Very Good

Sale Price

$2,450.00

Heavy duty design, but light weight enough for two people to lift and carry. It comes with a 20” guard so you can cut up 7-1/2” deep. The four position, heavy duty handles offer no slack and doesn’t rattle like other adjustable handles. Through-rear axle for added strength. Solid sealed and self-aligning blade shaft bearings. Slip-on blade guard for easy blade access. Three V-belts for extra power delivery to the blade shaft. Left or right side sawing. This saw has just had its wheels replaced. Purchase this saw buy 09/15/20 and get an extra set of belts.

1/1

Flat Sawing

CC3740 E 40 HP 480 PHIII – 36” Slab Saw

Manufacturer

Diamond Products

Motor

40 HP 480 PHIII Baldor with Soft Start

Mileage/Hours

Condition

Good

Sale Price

$6,500.00

Largest electric concrete saw available with soft start added for longer motor life and easy starts for this 40 HP motor.

1/5

Flat Sawing

CC6560 XLS 71 HP Deisel - 36 Slab Saw

Manufacturer

Diamond Products

Motor

71 HP Duetz Diesel

Mileage/Hours

Condition

Good

Sale Price

$5,000.00

This Diamond Products Core Cut 6560 XLS is a powerful diesel walk-behind concrete flat saw designed to cut up to 15-1/2″ deep. Suitable for road work, service work and jobs that require high production rates. This saw new wheels all the way around, was been sent back to DP for reconditioning and is still in the shrink-wrap. DP Work tag available upon request. Call today! It’s ready to ship.

1/1

Flat Sawing

FS7000D Diesel Self-Propelled Concrete Saw

Manufacturer

Husqvarna

Motor

74HP T4f Deutz Diesel Engine

Mileage/Hours

Condition

Very Good

Sale Price

$24,950.00

The FS 7000 D is a powerful diesel walk-behind concrete flat saw with low emissions, developed to be compliant with Tier 4 regulations. Ideal for concrete and asphalt cutting up to 17 1/4″ deep. Suitable for road work, service work and smaller jobs that require high production rates. This saw comes with 30” and 42” Blade Guards.

 

Wall Saw

1/4

Wall Sawing Wire Sawing Core Drilling

CB30 EXL 480 Electric Hydraulic Power Pack

Manufacturer

Diamond Products

Motor

10 HP-3PH 480V Baldor Electric Motor

Mileage/Hours

Condition

Very Good

Sale Price

$3,500.00

30 HP 480 PHIII Hydraulic Power Pack with hoses on 4-wheel castors. Equipped with 2 - 30’ - ¾” Hoses and ¾” Brunning dripless fittings.

1/3

Wall Sawing Wire Sawing

G40 / 32 KW

Manufacturer

Diamond Products

Motor

10 HP-3PH 480V Baldor Electric Motor

Mileage/Hours

Condition

Very Good

Sale Price

$8,500.00

Engine Model: Mitsubishi S4S-Y262SD, 42 hp The G40WDO mobile generator, rated with prime power output of 39 kVA is exempt from permitting fees or surcharges assessed in some states on diesel-powered equipment of 50 or more horsepower. This unit is trailer mounted and ready for towing.

1/1

Wall Sawing Wire Sawing Core Drilling

PP220 HF 200-500 V 1PH Power Pack

Manufacturer

Diamond Products

Motor

10 HP-3PH 480V Baldor Electric Motor

Mileage/Hours

Condition

Very Good

Sale Price

$2,500.00

PP220 is a versatile electric power pack developed for our high frequency-powered PRIME™ product range. This water-cooled power pack is perfect for applications that have multiple cutting sites due to its low weight and compact design. Only one hose and one cable from converter to machine, simplifying setup and transport.

1/1

Wall Sawing Wire Sawing Core Drilling

PP490, 380-480V 50-60HZ Power Pack

Manufacturer

Diamond Products

Motor

10 HP-3PH 480V Baldor Electric Motor

Mileage/Hours

Condition

Very Good

Sale Price

$21,500.00

With Husqvarna PP 490 electric power pack you can power your large wall sawing system Husqvarna WS 482 HF, including the wire saw Husqvarna CS 10, as well as your Husqvarna PRIME™ handheld power cutters and drill motor. This means more work done with less equipment.

1/1

Wall Sawing Wire Sawing

WS 482 Wall Saw

Manufacturer

Diamond Products

Motor

10 HP-3PH 480V Baldor Electric Motor

Mileage/Hours

Condition

Very Good

Sale Price

$59,950.00

Includes PP490 Power Pack, 40” Blade Guard, 48” Blade Guard, 32” Flush Cut Blade Guard, 40” Flush Cut Blade Guard, 48” Flush Cut Blade Guard, 4 - 88” Track, 8 - Mounting Brackets, 4 - Track Connectors
Husqvarna WSC40 Chain Saw Adapter Available - $7,500.00

 

Wire Saw

1/4

Wall Sawing Wire Sawing Core Drilling

CB30 EXL 480 Electric Hydraulic Power Pack

Manufacturer

Diamond Products

Motor

30 HP 480 PHIII Baldor Motor

Mileage/Hours

Condition

Good

Sale Price

$3,500.00

30 HP 480 PHIII Hydraulic Power Pack with hoses on 4-wheel castors. Equipped with 2 - 30’ - ¾” Hoses and ¾” Brunning dripless fittings.

1/1

Wire Sawing

CS10 Wire Saw

Manufacturer

Husqvarna

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$11,550.00

The CS 10 from Husqvarna is a saw system engineered with advanced solutions that guarantee highly efficient performance. Electric wall saw models, WS 482 HF and WS 440 HF, can be paired with this unit. The rotation direction of the wire can be reversed, and is installable on both sides of the track, making it possible to saw in both vertical and horizontal orientations. Water is not needed for dry cutting. Wall Saw and Drill Stand not included.
Included: 2 - Offset Pulleys w/ Slot, 2 - Offset Pulleys Single, Drive and Idler Wheels, Guard

1/3

Wall Sawing Wire Sawing

G40 / 32 KW

Manufacturer

Doosan G40 Generator

Motor

Mitsubishi S4S-Y262SD, 42 hp

Mileage/Hours

5805

Condition

Good

Sale Price

$8,500.00

Engine Model: Mitsubishi S4S-Y262SD, 42 hp The G40WDO mobile generator, rated with prime power output of 39 kVA is exempt from permitting fees or surcharges assessed in some states on diesel-powered equipment of 50 or more horsepower. This unit is trailer mounted and ready for towing.

1/1

Wall Sawing Wire Sawing Core Drilling

PP220 HF 200-500 V 1PH Power Pack

Manufacturer

Husqvarna

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$2,500.00

PP220 is a versatile electric power pack developed for our high frequency-powered PRIME™ product range. This water-cooled power pack is perfect for applications that have multiple cutting sites due to its low weight and compact design. Only one hose and one cable from converter to machine, simplifying setup and transport.

1/1

Wall Sawing Wire Sawing Core Drilling

PP490, 380-480V 50-60HZ Power Pack

Manufacturer

Husqvarna

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$21,500.00

With Husqvarna PP 490 electric power pack you can power your large wall sawing system Husqvarna WS 482 HF, including the wire saw Husqvarna CS 10, as well as your Husqvarna PRIME™ handheld power cutters and drill motor. This means more work done with less equipment.

1/1

Wall Sawing Wire Sawing

WS 482 Wall Saw

Manufacturer

Husqvarna

Motor

NA

Mileage/Hours

Condition

Very Good

Sale Price

$59,950.00

Includes PP490 Power Pack, 40” Blade Guard, 48” Blade Guard, 32” Flush Cut Blade Guard, 40” Flush Cut Blade Guard, 48” Flush Cut Blade Guard, 4 - 88” Track, 8 - Mounting Brackets, 4 - Track Connectors
Husqvarna WSC40 Chain Saw Adapter Available - $7,500.00